01 Chemicals & Consumables

Electrode Paste

Electrode paste is a carbon material used to form electrodes in smelting furnaces. Its ash content is low and its volatile matter is stable. Kemindo supplies it for nickel smelting.

Request a quote
Industries
Mining, Nickel
Availability
Available

Our strengths:

  1. Lower ash content.
  2. Accurate dosing and stable volatile matter content.
  3. Good electrical and thermal conductivity, with a sintering speed appropriate to the consumption rate of the working end.
  4. Smelting at lower temperature with adequate fluidity and homogeneous composition.
  5. High resistance to high temperature, oxidation and thermal shock; low resistivity and high mechanical strength after sintering.

Specifications

Specifications Electrode Paste
ParameterValueUnit
Ash Contentmax 2 - 10%
Simax 0.28%
Femax 0.25%
Pmax 0.00%
V.M10.0 - 15.0
Densitymin 1.46g/cm3
Compression Strengthmin 18Mpa
Resistivity55 - 90µΩm

Frequently asked questions

What are the specifications of Electrode Paste?

Ash Content max 2 - 10 %; Si max 0.28 %; Fe max 0.25 %; P max 0.00 %; V.M 10.0 - 15.0; Density min 1.46 g/cm3. The full specification table is on this page.

What other names is Electrode Paste known by?

Electrode Paste is also known as: Pasta Elektroda, supplier Electrode Paste Indonesia, pemasok Pasta Elektroda, soderberg electrode paste nickel.

Where can I buy Electrode Paste / how do I request a quote?

Send a quote request through the form on this page, or contact the Kemindo sales team at marketing@kemindogroup.com / +62 21 22510447. Prices are not published; quotes are given per request.

Where to buy / request a quote

Contact
marketing@kemindogroup.com · +62 21 22510447

Request a quote

Request a quote for Electrode Paste

Tell us the volume, delivery location and specification you need. Sales replies within one business day.

Required

Enter a valid email address

Write at least 10 characters

Your data is only used to reply to this request.

Updated

Request a quote Call